Your shopping cart is empty!
40" Flamingo Balloon
40" Flamingo Balloon
Size: 1280mm x 690mm
Material: aluminum foil
Color: pink
Inflatable instructions:
1. If you want to easily fill up your balloon, find a hand pump that has a narrow tip. The smaller the tip, the easier it is to get inside the filling tab.Ideally, you want a tip that is thin and about(2.5–5.1 cm) long.
2. Place the air pump in between the plastic seal on the filling tab. The filling tab is a small section of the balloon that allows you to fill it with air. There are typically 2 layers of plastic inside the filling tab. Slip the tip of the pump in between the plastic layers so you can fill up the balloon.
3. Hold the plastic seal tightly so the air doesn’t come out. Use 1 hand to pinch the balloon around the opening so the air stays inside. This way, you can fill up the balloon rather than letting the air out.
4. Pump the air into the balloon to fill it up. With your dominant hand, crank the pump or press up and down on the pumping unit repetitively to fill the balloon with air. Continue pumping until the balloon is about 90% full.
At this point, the balloon will be firm but still slightly bouncy.It is easy to overfill the balloon when using a hand pump, so be careful as you do this.
5. Remove the tip of the pump and pinch the balloon closed. After the balloon is mostly full, secure the filling tab with your hand, and gently pull the tip of the pump out of the balloon. As you do this, the balloon will seal itself.
Size: 1280mm x 690mm
Material: aluminum foil
Color: pink
Inflatable instructions:
1. If you want to easily fill up your balloon, find a hand pump that has a narrow tip. The smaller the tip, the easier it is to get inside the filling tab.Ideally, you want a tip that is thin and about(2.5–5.1 cm) long.
2. Place the air pump in between the plastic seal on the filling tab. The filling tab is a small section of the balloon that allows you to fill it with air. There are typically 2 layers of plastic inside the filling tab. Slip the tip of the pump in between the plastic layers so you can fill up the balloon.
3. Hold the plastic seal tightly so the air doesn’t come out. Use 1 hand to pinch the balloon around the opening so the air stays inside. This way, you can fill up the balloon rather than letting the air out.
4. Pump the air into the balloon to fill it up. With your dominant hand, crank the pump or press up and down on the pumping unit repetitively to fill the balloon with air. Continue pumping until the balloon is about 90% full.
At this point, the balloon will be firm but still slightly bouncy.It is easy to overfill the balloon when using a hand pump, so be careful as you do this.
5. Remove the tip of the pump and pinch the balloon closed. After the balloon is mostly full, secure the filling tab with your hand, and gently pull the tip of the pump out of the balloon. As you do this, the balloon will seal itself.
